Applications
  • Aviation
  • Marine
  • Masonry
  • Body Shop
  • Transportation
  • Military
  • Residential
  • Civil Engineering
  • Powder Coatings
 
 
      TOP Coat 5555
 

Generic Name:  Zinc Phosphate Coating (Immersion method)

The Encompass a wide range of weights and crystal characteristics, ranging from heavy films with coarse crystals to ultra thin Microcrystalline deposits. When we use zinc phosphate coatings vary from light to dark gray in color. When we use zinc phosphate coatings, we have to pour accelerator into the solution.

 

Zinc phosphate coatings, can be applied by spray, immersion or by a combination of the two. Coating can be used for any of he following applications of phosphating.

1.    base for paint or oil                                          

2.    aid to cold  forming, tube drawing and wire drawing

3.    Increasing wear resistance or rust proofing.

We can use it at temperature between 75-80C.     Spray coating on steel surface range in weight from 1.08 to 10.8 g/m2(100 to 1000 mg/ft2)Immersion coatings from 1.61 to 43.0 g/m2 (150 to 4000 mg/ft2).

TOP Coat 5555 Meets MIL-DTL-16232G standard.

 
This is a brief review of the products used in most industrial operations.                    A short description of the function of these products, by category is followed by a list of some of the products in each group. No attempt has been made to list all of the products for a good reason. We have hundreds of formulas. Our marketing section is ready to provide varied forms of Industrial Cleaners for the following industries:
Our Pricing is not only amongst the lowest in the industry but we also offer annualized volume rebates . The more you purchase from us on a yearly basis the more you will receive back, one way we say thank you. We also say thank you through our technical servicing support. You have a problem and at Top Chemical we have the solutions.
Home : About us : Products : Purchase : Contacts
Topchimie.Com © 2003 • Designed By Ehsun • Terms Of Use