• Aviation
  • Marine
  • Masonry
  • Body Shop
  • Transportation
  • Military
  • Residential
  • Civil Engineering
  • Powder Coatings
     Marine Paint Stripper


Marine Pain Stripper Environmental Friendly        (Brush type EF 6600-M
Ideal for stripping the paint from any place in a boat or yacht. It can even take off the THICK underlay coating.

TOP Marine Paint Stripper can be applied to most interior and exterior surfaces including fiberglass, metals, (including steel, aluminum), woods; (including hardwoods - it does not raise or darken the grain). Top Marine Paint Stripper is also safe to use on brick, stone, concrete, marble, finely detailed cabinetry, rubber, plastics, as well as plaster and wood moldings.


  • No Chromates, No Phenol, No Ammonia,            No Chlorinated Solvents, No Methylene Chloride
  • No flashpoint - Non-flammable
  • No fumes
  • Minimal VOC content
  • No Specialist Protective Equipment
  • Cost-effective - No evaporation
  • Available in 5 and 55 Gallons
  • Suitable for Brush and Spray Applications
  • Environmental safe
  • Effective in Max. 2-4 hours
  • Multiple coats of anti-fouling paint can be   removed with only one application.
  • Room  temperature, No heat’s needed
  • Safe On:
    • Fiberglass
    • Aluminum
    • Alloys
    • Wood
    • Lead
  • Will not damage the gel coat on fiberglass.
  • Easily rinseable from parts with either steam or high pressure water.
  • Ideal to remove multi-Layers of paints
  • Will not damage epoxy coated cold molded hulls.
  • Harmless for the boatyard's water catchment system.
  • Reduction in labor time compared to grit blasting.
  • Reduction in total time for job completion.
  • Product works without supervision and worker. can be doing other chargeable labor while it works.
  • Do not generate a hazardous wastewater




Home : About us : Products : Purchase : Contacts
Topchimie.Com 2003 • Designed By EhsunTerms Of Use